Descargar Imprimir esta página

Panasonic PanaSync / Pro P110 Instrucciones De Operación página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

< Onscreen Display >
< Function and Operation >
|
(A TRAPEZOIDAL adjustment
A
TRAPEZOID
50
WT
{7
PARALLELOGRAM
adjustment
£7 PARALLELOGRAM
50
EEEE
1|
t; ROTATION (Image tilt) adjustment
Ch
ROTATION
50 EE |
KR
ne
1
COLOR selection
COLOR TEMP
1
2
ka
`
[TE
USER : [2] |
USER COLOR adjustment
Note: Record the initial values of R,
G and B here before making
any adjustments:
R (Red)
G (Green)
B ( Blue )
DISPLAY FREQUENCY
DISP.FREQ
fH
:
56.1kHz
fV
:
70.0
Hz
BERENS
2O VIDEO INPUT LEVEL
Po
VIDEOLEVEL
0.7V
MEN
0.7/1V:[8] |
The image can be corrected for trapezoidal
distortion.
Press the ba key to make the top edge narrower,
the BP] key to make the bottom edge narrower.
The image can be corrected for parallelogram
distortion.
Press the ba key to collapse the parallelogram to
the left, the P key to collapse it to the right.
Use this to adjust for tilt on the screen.
Press the [4 key to rotate the image slightly
counterclockwise, the Bi key to rotate the image
slightly clockwise.
"Pressing the [4 and P} keys simutaneously adjusts
rotation to its factory preset level.
The white in the image can be adjusted.
1) Use the Hi - $ keys to select 1: 9300K, 2:
6550K or 3 : the user's preferred color.
2) If "3 : user's color" is selected, " 2 " appears in
the lower right of the On-Screen Display.
Press the front [2] key to call the USER
COLOR adjustment screen.
The white in the video image can be adjusted to
the user's preferred color.
1) Use the [2] key to select R (red) or G (green)
or B (blue).
2) Use the Ed KR keys to adjust the color as
desired.
* Memory recall of the user's color is not
possible, so make a note of the initial
setting before adjusting.
- Press the [1] key to save the adjustment.
The computers horizontal and vertical sync
frequency will appear.
+ Press the [1] key to return to main menu.
The video input signal level can be matched to
the computer being used. Either 0.7V or 1V can
be selected with the [2] (0.7V/1V) key.
Note : 0.7V is typical.
(H wrong level is selected image may be too
dim or too bright.)

Publicidad

loading