Publicidad
Idiomas disponibles
Idiomas disponibles
Pin Assignment
Follow the instructions below to connect the P110 to a computer.
A. Signal connector: 15-pin mini D-Sub (PS/2 or PC/AT compatible model)
Connect the signal cable to the 15-pin mini D-Sub connector on the display unit,
B. Signal connector: 15-pin D-Sub (Apple computer)
Convert a MAC 15-pin D-Sub connector to a 15-pin mini D-Sub connector using a Panasonic MAC adapter,
and connect it to the 15-pin mini D-Sub connector on the display unit.
10
5
1
6
< REAR PANEL >
v
eee ,
-
ieee
| O
e808
RES
15
11
[Font a]
A KH
89006
Pin assignments of 15-pin mini D-Sub connector
PtP
reo gl]
2 Treen video signal
5
annees 7
|
CC BSC
Ground for Red video signal
Ground for Green video signal
PB
Ground for Blue video signal
TS ET
oaa |
+: "VESA"s Display Data Channel (DDC) Standard.
C. Signal connector: BNC connector
Sync on green system
Connect the signal cable to RED, GREEN (sync on
green) and BLUE BNC connectors.
Composite sync system
Connect the signai cable to RED, GREEN, BLUE
and H-SYNC (H/V composite} BNC connectors.
Separate sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC and V-SYNC BNC connectors.
Note : If your computer's video output is over 110MHz, it is recommended that it be
used with the BNC connectors.
aay ee
Publicidad
