Operation
< Onscreen Display>
< Function and Operation>
MONITOR SELF-TEST
This display indicates that the monitor is
operating normally. When one of the following
conditions occurs, press one of the 4 front panel
keys to call the appropriate display.
NOSIGNAL
1) The input synchronization signal is out of
range.
2) The unit has entered power saving mode
O
Gs SU
(only displayed when in OFF STATE).
3) There is no signal (not connected to the
computer, computer power is OFF, etc.).
When the [2] key is pressed, the unit
goes into [INPUT SELECT] mode.
MENU
The adjusted items are represented
by icons.
When the [1] key is pressed, the
menu screen appears.
Use the kd - BI keys to move the
cursor to the item to be adjusted,
then press the [2] key to call the
adjustment menu,
O CONTRAST Adjustment
X BRIGHTNESS Adjustment
H DEGAUSS
«> RECALL
Œ
H.POSITION Adjustment
E H.SIZE Adjustment
V.POSITION Adjustment
M
V.SIZE Adjustment
ET V.PINCUSHION Adjustment
© TRAPEZOID Adjustment
£7 PARALLELOGRAM Adjustment
Ch ROTATION
(Y COLOR TEMP
DISP. FREO
20 VIDEO LEVEL Selection
2% INPUT SELECT
ade H. MOIRE reduction
-& V. MOIRE reduction
74 LANGUAGE Selection
sx: FOCUS
E] H. CONVERGENCE
V. CONVERGENCE
ONTRAST
fal |
CONTRAST adjustment
Y
CONTRAST
100 E
Adjust the screen contrast to match the brightness
level in the room. Press the Bl key to make the
image lighter, the Ed key to make it darker.
Direct operation: Even if the Menu screen does
not appear, the contrast can be adjusted by
pressing the di or B key.
Contrast adjusts the white level.
If the kd and P keys are pressed at the same
time on the Contrast adjustment screen, the
maximum level (100) will be set.
BRIGHTNESS
adjustment
Adjust the brightness to match the brightness
level in the room. Press the [di key to make the
background darker, the P] key to make it lighter.
Brightness adjusts the black level.
* If the E and Bl keys are pressed at the same
time on the Brightness adjustment screen, the
standard levet (50) will be set.
XE BRIGHTNESS
Go
E
EM
ooo
a
te
>
SÍ MANUAL DEGAUSSING
Manual degaussing operation can be selected.