Recall Function - Franke FHFB 905 5I ST Manual De Instrucciones

Recall function

Remaining heat indicator
Extra powerful setting
(hotplates marked "P")
Heat up time automatic
26
• Functional LED's such as Timer, multi-zone, keep on glowing according to their
status.
The pause mode can only be active for maximum 10 min. If the pause mode is not
deactivated within 10min the control switches off automatically. Throughout the
pause time the (A) button can be used to switch the control off. In this case the
pause mode is also deactivated.
Deactivating the pause mode:
• Press the (B) followed, the LEDs light up above the cursor of one of cooking zones.
• Within 10 seconds press and scroll from the left to the right on the cursor of the
illuminated area.
The LED above the pause key turns off and the condition before the pause mode is
restored.
If the control was accidentally switched off through the main switch (A) all settings can
be restored using the recall function. After switching the control off from the main switch
the user has 6s to switch the control on again and then he has another 6s to press the
pause button (B) in order to recall the settings. The recall function can only be used if at
least one cooking zone was active (cooking level >0) independent from key lock.
Glass ceramic hob also features remaining heat indicator "H". Hotplates are not heated
directly, but through return heat radiating from the dish. As long as the symbol "H" is on
after the hotplate was switched off, the remaining heat may be used for warming up
food or for melting.
Even when the symbol "H" disappears, the hotplate may still be hot.
Be careful of burns!
Extra powerful setting may be additionally switched on for fast cooking on indicated
hotplates. This extra hotplate power is used for heating large quantities of food.
After switching on, the extra power is activated for 10 minutes then automatically
switches back on to the maximum normal level 9.
During the time extra power is activated, the power of other hotplates is limited. This is
indicated on the power display by intermittently flashing the selected cooking level and
limited power for a few seconds.
Activating extra powerful setting
• Press the (H) sensor of the required cooking zone, the extra cooking is active. The
display shows "P".
Premature turning extra powerful setting off
• Press and scroll on the cursor of the wanted zone, until you get to "0" if you want to
turn off the zone, or until the wanted cooking level.
When automatic cooking mode is activated the hotplate will operate at maximum power
for a limited period of time and then automatically switch to the reduced power level to
resume cooking. It may be switched on in any of the hotplates for all power settings
except for setting "9" where power is set at maximum all the time.
Automatic cooking mode is activated on any idle hotplate.
• Choose the required continuous cooking level and hold it for 3 seconds.
• The activated heat up time automatic will be displayed through alternating between
„A" and the selected continuous cooking level on the display.
As soon as the parboiling time is over, the preselected continuous cooking level is valid
again.
Power setting 1
Max. power
48''
cooking time
Once the time from the chart below expires, the function is switched off and "A"
disappears.
You can also switch the automatic cooking mode off anytime by bringing power setting
to "0".
2 3 4
1'44'' 2'28'' 3'12'' 4'08''
5 6 7 8
1'20'' 1'68'' 2'16''