Kichler Spyn Lite 300375 Manual De Instrucciones página 13

ATTACHING THE FAN BLADES
CAUTION: Before continuing installation, confirm that the power is
still turned o at the main circuit breaker or by removing the circuit
fuse. Turning the power o using a wall switch is not su cient to
prevent electrical shock.
Step 1. NOTE: The holes in the fan blades and the holes in the motor
flywheel are marked "A", "B", or "C".
Line up the holes in the fan blades with the holes in the motor flywheel
(Line up A to A, B to B, and C to C). Attach fan blades to the flywheel
with the washers and fan blade mounting screws provided. Tighten
to secure. (Fig. 17)
INSTALLING THE SWITCH COVER
CAUTION: Before continuing installation, confirm that the power is still
turned o at the main circuit breaker or by removing the circuit fuse.
Turning the power o using a wall switch is not su cient to prevent
electrical shock.
Step 1. Remove the mounting plate screw that is marked with a brown
dot label from the mounting plate. Retain mounting plate screw.
Loosen the other two mounting plate screws (do not remove). (Fig. 18)
Motor Body
Label (A/B/C)
Motor Flywheel
Fan Blades
Washers
Fan Blade Mounting Screws
Mounting Plate
Brown Dot Label
Mounting Plate Screw
Fig. 17
Fig. 18
52" Spyn Lite 13