Corghi ERCO 3222N CEL Manual De Uso página 56

3.6 LIFT IDENTIFICATION AND PICTOGRAMS DESCRIPTION
The safety signals (Fig. 5) described in this manual are applied onto the lift (Fig. 6), and warn about unsafe and hazardous situations.
Decals shall be kept clean and, if detached or damaged, they shall be immediately changed.
Carefully read the meaning of the safety signals, and memorise it:
1 Instructions plate
2 CE plate
A Serial No.
B Type
C Model
D Max. Load
E Ground
F Manuf.year
G Voltage
H Frequency
3 Manufacturer's logo
Each lift is supplied with the identification plates (2, Fig.5A) relevant to the different versions.
Data (A) and (B) have always to be mentioned for any service and spare parts need.
3.7 INTENDED USE
The vehicle lifts described in this manual are designed and manufactured for lifting vehicles for inspection, maintenance and/
or repair purposes only.
• The vehicle lift should be used only for lifting vehicles within the load capacity limits given in the IDENTIFICATION
PLATE (2, Fig. 5A) and in the paragraph 1.3 "LOAD DISTRIBUTION" (Fig. 3).
22
4
5
I Power 6
L Pressure 7
M Absorption 8
9
10 Danger signal. Voltage on.
CAREFULLY READ THE INSTRUCTIONS GIVEN IN THIS MANUAL BEFORE USING THE LIFT
Column greasing
Max. load
Load distribution
Danger signal. Before carrying out any maintenance
operation, stop the equipment and consult the user's
manual
Danger signal. Fall possibility. Do not get up on the
runways
Danger signal. Risk of feet shearing.