Parkside PHKS 1350 D3 Traduccion Del Manual De Instrucciones Originale página 25

Wear­protective­gloves!
Suitable for wood
Suitable­for­PVC­plastics­(polyvinyl­
PVC
chloride)
Do­not­use­any­damaged­saw­
blades
Direction­of­rotation­of­saw­
blade
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention
Instruction symbols with information
on­preventing­damage
­ Disconnect­the­mains­plug
Help symbols with information on
improving­tool­handling
General Safety Directions
for Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock,­fire­and/or­severe­injuries.
Retain all safety directions and in-
structions for future use.
The­term­„power­tool"­in­the­warnings­
refers­to­your­mains-operated­(corded)­
power­tool­or­battery-operated­(cordless­
power­tool).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered­or­dark­areas­invite­ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool.­Distractions­can­cause­you­to­
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fied­plugs­and­matching­outlets­will­
reduce risk of electric shock.
b) Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and re-
frigerators.­There­is­an­increased­risk­
of electric shock if your body is earthed
or grounded.
c) Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never
use the cord for carrying, pull-
ing or unplugging the power
tool. Keep cord away from
heat, oil, sharp edges or moving
parts. Damaged­or­entangled­cords­
increase the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
GB MT
25