• Maintenanceworkonthesawblades,
such as repair or regrinding, should be
performed by a professional.
Storage
Store the saw blade in a dry and dustproof
location and out of reach of children.
Safety Instructions for
Handling the Laser
• Laserradiationwarning!Donotlook
into the beam! Laser class 2
• Donotaimthelaseratreflectivesur-
faces.
• Markingsandwarningsarelocatedbe-
low the laser exit aperture and on the
sideofthefixedguardcover.
Safety information for
batteries
Under normal operating conditions, a her-
metically sealed battery does not present
any hazards.
A battery can present a hazard in the fol-
lowingcases:
• DANGER!Dangertolifedueifswal-
lowed! Keep children away from bat-
teries.
• CAUTION!Riskofexplosionand
burns! When handling batteries, ob-
servethefollowing:
•Neveropenordamagebatteries.
•Nevertrytochargedisposablebatter-
ies.
•Neverexposebatteriestoasourceof
heat,fireordirectsunlight.
•Nevershort-circuitbatteries.
•Nevermixusedandnewbatteriesin
adevice.
• Pay attention to the correct polarity
when inserting the batteries.
•Takeleakingbatteriesoutofthebat-
tery compartment immediately.
• WARNING! Risk of chemical burns
and poisoning from battery acid! If
toxicandcausticbatteryacidleaks:
•Aftereyecontact:
Flush the eyes with a large amount of
runningwaterfor30minutes.Calla
doctor right away.
•Afterskincontact:
Takeoffsoiledclothingandrinsethe
skin with a large amount of running
waterforatleast15minutes.Calla
doctor if irritation, injury or pain per-
sists.
•Afterbreathingitin:
Get some fresh air if you notice your
respiratorytractisirritated.Calla
doctor if irritation persists.
•Afterswallowing:
Donotforcevomiting.Iftheaffected
person is conscious, make sure that
they rinse their mouth and the sur-
rounding areas of skin with water for
atleast15minutes.Consultadoctor
rightaway.Calladoctorrightaway.
Operation
Checking the function of the
protective hood
Illustration
:
• Pullthepulllever(17)oftheprotective
bonnet(16)asfarasitwillgo.
Theguardcover(19)mustnot
jam and must automatically
spring back to its original position
whenthepulllever(17)isreleased.
GB MT
31