BIG ASS FANS HAIKU L Guia De Instalacion página 17

FAN INSTALLATION
7. Install mounting ball
Do not over-tighten the wedge screw.
Slide mounting ball over downrod (Fig. 7.1).
Insert steel pin into hole at top of downrod, and then slide the mounting ball upward,
seating the steel pin in the inner slots (Fig. 7.2).
Insert wedge into mounting ball and secure with wedge screw (Fig. 7.3). Tighten screw
enough to prevent movement between the mounting ball and downrod, but do not
over-tighten.
Fig. 7.1 Fig. 7.2
Steel Pin
Mounting Ball
Downrod
Fig. 7.3
Wedge Screw
Wedge
15