Publicidad
Idiomas disponibles
Idiomas disponibles
1
Precautions for safety
The manufacturer shall not assume any liability for the damage
caused by not observing the description of this manual.
WARNING
General
• Carefully read Owner's Manual before starting the air conditioner.
There are many important things to keep in mind for daily
operation.
• Ask for installation to be performed by the dealer or a
professional. Only a qualifi ed installer is able to install an air
conditioner. If a non-qualifi ed person installs an air conditioner, it
may result in problems such as fi re, electric shock, injury, water
leakage, noise and vibration.
• Do not use any refrigerant different from the one specifi ed for
complement or replacement.
Otherwise, abnormally high pressure may be generated in the
refrigeration cycle, which may result in a failure or explosion of
the product or an injury to your body.
• Before opening the service panel of the outdoor unit, set the
circuit breaker to the OFF position. Failure to set the circuit
breaker to the OFF position may result in electric shocks through
contact with the interior parts.
• Before carrying out the installation, maintenance, repair or
removal work, be sure to set the circuit breakers for both the
indoor and outdoor units to the OFF position. Otherwise, electric
shock may result.
• Wear protective gloves and safety work clothing during
installation, servicing and removal.
• Do not touch the aluminium fi n of the outdoor unit. You may injure
yourself if you do so. If the fi n must be touched for some reason,
fi rst put on protective gloves and safety work clothing, and then
proceed.
• Do not climb onto or place objects on top of the outdoor unit.
You may fall or the objects may fall off of the outdoor unit and
result in injury.
• Before cleaning the fi lter or other parts of the outdoor unit, set the
circuit breaker to OFF without fail, and place a "Work in progress"
sign near the circuit breaker before proceeding with the work.
3-EN
• The refrigerant used by this air conditioner is the R410A.
• The air conditioner must be transported in stable condition.
If any part of the product are broken, contact your distributor.
• We do not take any responsibility on the local design.
Selection of installation location
• Do not install in a location where fl ammable gas leaks are
possible. If the gas should leak and accumulate around the unit, it
may ignite and cause a fi re.
• During transporting the air conditioner, wear shoes with protective
toe caps, protective gloves, and other protective clothing.
• To transport the air conditioner, do not take hold of the bands
around the packing carton. You may injure yourself if the bands
should break.
• Places where the operation sound of the outdoor unit may cause
a disturbance. (Especially at the boundary line with a neighbour,
install the air conditioner while considering the noise.)
Installation
• The designated bolts (M12) and nuts (M12) for securing the
outdoor unit must be used when installing the unit.
• Install the outdoor unit property in a location that is durable
enough to support the weight of the outdoor unit. Insuffi cient
durability may cause the outdoor unit to fall, which may result in
injury.
• Install the unit in the prescribed manner for protection against
strong wind and earthquake. Incorrect installation may result in
the unit falling down, or other accidents.
• Fix the screws back which have been removed for installation or
other purposes.
Refrigerant piping
• Install the refrigerant pipe securely during the installation work
before operating the air conditioner. If the compressor is operated
with the valve open and without refrigerant pipe, the compressor
sucks air and the refrigeration cycles is over pressurized, which
may cause a injury.
• Tighten the fl are nut with a torque wrench in the specifi ed
manner. Excessive tighten of the fl are nut may cause a crack in
the fl are nut after a long period, which may result in refrigerant
leakage.
– 2 –
EN
EN
ID
4-EN
Publicidad
