Publicidad
Idiomas disponibles
Idiomas disponibles
(DN) O.DN
◆ Applicable control settings (Indoor unit Code (DN) number settings)
Basic procedure
Be sure to stop the air conditioner before making settings.
(Change the setting while the air conditioner is not working.)
Remote controller model name : RBC-AWSU52-UL
Field setting menu (2/3)
6.Setting louver position
7.Setting timer operation mode
8.Easy I.DN setting
9.DN Setting
9.DN setting
10.Reset Power Consumption data
83-EN
7
After finishing setting the data of the code
(DN) number, push [
Set/Fix]
"Continue?" is displayed.
8
To set the data of other codes (DN) number,
push [
Set/Fix]
To not do other settings, push [
Return]
The changes are fixed, and the "Field setting
menu" screen returns.
" " appears while data is changing.
• To change settings of another outdoor unit,
repeat from Procedure 1.
1
Push [
Menu] to open the "Menu"
2
Push and hold [
Menu] and [
] at the
same time to open "Field setting menu"
Push and hold 4 seconds.
3
In the "Field setting menu" screen, push
[
] and [
] to select "DN setting", and
then push [
Set/Fix]
4
Push [
] and [
] to select "Indoor
unit", and the push [
Set/Fix]
◆ Applicable control settings (Indoor unit Code (DN) number settings)
Basic procedure
Be sure to stop the air conditioner before making settings.
(Change the setting while the air conditioner is not working.)
Remote controller model name : RBC-AWSU52-UL
Field setting menu (2/3)
6.Setting louver position
7.Setting timer operation mode
8.Easy I.DN setting
9.DN Setting
9.DN setting
10.Reset Power Consumption data
0013
0013
– 42 –
1
Push [
Menu] to open the "Menu"
2
Push and hold [
Menu] and [
] at the
same time to open "Field setting menu"
Push and hold 4 seconds.
3
In the "Field setting menu" screen, push
[
] and [
] to select "DN setting", and
then push [
Set/Fix]
4
Push [
] and [
] to select "Indoor
unit", and the push [
Set/Fix]
"Indoor unit" was selected, the fans and louvres
of the indoor units operate.
When doing group connections:
The fans and louvres of the selected indoor
units operate.
5
Push [
] to black highlight the code (DN),
and then push [
] and [
] to set the
code number to [****]
6
Push [
] to black highlight the data, and
then push [
] and [
] to set the data
7
After finishing setting the data of the code
(DN), push [
Set/Fix]
"Continue?" is displayed.
8
To set the data of other codes (DN), push
[
Set/Fix]
To not do other settings, push [
Return]
The changes are fixed, and the "Field setting
menu" screen returns.
" " appears while data is changing.
When doing group connections:
Push [
Return] to open the unit selection
screen. In the unit selection screen, push
[
Return] to briefly display " " , and then
return to the "Field setting menu" screen.
EN
EN
ID
84-EN
Publicidad
