Publicidad
Idiomas disponibles
Idiomas disponibles
Identification
Each machine is fitted with a serial plate (shown below) which details the
following:
1.
Model
2.
Date of Manufacture (DOM)
3.
Serial Number
4.
Mass
When enquiring regarding spares or additional equipment, ensure you have
this information to hand.
Implement Decals
If your implement does not contain all of the decals shown below, please contact your equipment supplier for replacement decals before use.
Note: All decals must be present and visible. It is imperative that these are replaced if damaged to prevent potential harm to users.
CAUTION - Read operators
manual before handling this
machine. Observe in structions
and safety rules when operating
Attachment
Before attachment, ALWAYS ensure the following:
•
All safety guards & decals are in good working order and correctly fitted
•
All blades and mounting bolts are correctly fitted, undamaged, and not worn to excess
•
Lubrication points have been lubricated as per scheduled maintenance period
•
The engine oil level is correct & has been maintained as per the handbook
•
Drive belt(s) are in good working order
•
The tyres are free of damage and inflated to the correct pressure (0.35-0.55 Bar [5-8psi])
Attaching the Machine
1.
Reverse the towing vehicle up to the machine
2.
Attach the machine onto the towing vehicle's coupling using either the auto-lock coupling or suitable pin
hitch. Ensure the hitch is securely attached to the towing vehicle
3.
Attach the emergency stop control box to the towing vehicle, in a secure location within easy reach by the operator.
4.
With the engine OFF, adjust the working height to a suitable level by turning the height adjuster on top of the machine.
5.
Level the machine to suit the drawbar & cutting height. This is achieved by twisting the link connector fitted to the drawbar. When on
level ground, the top face of the mower deck (where the engine is mounted) should be approximately parallel to the ground.
WARNING - Rotating
blades. Maintain sensible
working distance from
machine and keep hands
and feet clear of blades
WARNING - risk of flying
objects. Keep a safe distance
from machine at all times
4
English
WARNING - Entanglement
Hazard. Keep hands away
from rotating components
Publicidad
