REMOTE CONTROLLER
COOLING MODE
The cooling function allows the
FRESH
air conditioner to cool the environment e
at the same time reduce the humidity
of the air.
To activate the COOL function, press the
keyMO
DALITYuntil the display shows
symbol.
With the or button set a lower temperature than
the room temperature.
FAN MODE (not FAN button)
FAN
Fan mode, ventilation only.
To set the FAN mode, press
until appears on the display.
DRY MODE
This function reduces the humidity in
DRY
the air to make the room more
comfortable.
To set the DRY mode, press
does not appear on the display. A function is activated
automatic preset.
AUTOMATIC MODE
CAR
Automatic mode.
To set the AUTO mode, press
appears on the display.
In AUTO mode the operation mode will be set
automatically based on the ambient temperature.
ereMOD ALITY
ereMOD ALITYuntil
MODE
as far as
HEATING MODE
The heating function allows the
HEAT
air conditioner to heat the room.
To activate the HEAT function, press the
keyMO
DALITYuntil the display shows
symbol.
With the or button set a temperature higher than that of
the room.
In HEATING operation, the appliance can
automatically activate a defrost cycle,
essential to clean the frost on the condenser so
to recover its heat exchange function. This
procedure usually takes 2-10 minutes. During the
defrost, fan stop operation
indoor unit. It comes back after defrosting
automatically in HEATING mode.
(For the North American market)
If necessary, you can press the ECO button 10
times within 8 seconds in heating mode for
start the forced defrost. Thaw the ice
outdoors much faster.
FAN SPEED function (FAN button)
FAN
Change the running speed of the fan.
FANp
to press
To set the fan speed to run,
can be set to AUTO / MUTE / LOW / LOW-MID / MID / MID-
HIGH / HIGH / TURBO speed in a circular way.
(Rapid)
Child safety function
1. Press lu
ngoMO
activate this function and repeat it to deactivate this
function.
2. Under this function, no single buttons will be active.
9
WEDtogether for
TÀAndYOU
FROM THERE