Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROLLER
MUTE function
MUTE
MUT
OR
button to activate this function,
1. Press
And
will appear on the remote display.
Repeat to deactivate this function.
2. When the MUTE function is activated, the remote control
will display the auto fan speed and drive
will run at the lowest fan speed for
a feeling of silence.
3. When the FAN / TURBO button is pressed, the MUTE
function will be canceled. The MUTE function cannot be
activated in dry mode.
SLEEP function
Automatic operating program
TO SLEEP
preset.
button to activate SLEEP
to press
TO SLEEP
function, and
appears on the display.
Press again to cancel this function.
After 10 hours of operation in sleep mode, the
air conditioner will switch to setting mode
previous one.
I FEEL function (Optional)
I FEEL
ENTOto activate the function, the
rAndI S
presses
will appear on the remote display.
Repeat to deactivate this function.
This function allows the remote control to measure the
temperature at its current location and send this signal to
the air conditioner to optimize the temperature around you
and ensure comfort.
It will automatically deactivate 2 hours later.
ECO function
ECHO
In this mode the device sets
automatically operation for
save energy.
ECHO
button, the
press the
display and the appliance will operate in ECO mode. to press
again to cancel it.
Note:The ECO function is available in both
COOLING and HEATING modes.
DISPLAY function (internal display)
Turn on / off the LED display on the
SCREEN
panel.
SCREEN ORbutton to turn off the LED
to press
display on the panel. Press again to turn on the
LED display.
GEN function (optional)
1. Turn on the indoor unit first and long press
MUT
OR
3 seconds to activate and repeat it
to deactivate this function.
2. In this function, short press
to select the General type L3 - L2 - L1 - OF.
3. Select OF and wait 2 seconds to exit.
11
appears on the
MUT
OR
button
Publicidad
