Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROLLER
SELF-CLEANING
function(Optional)
Only optional for some heat pump inverter appliances.
To activate this function, turn off the unit first
then pressCLEAN
then a beep will sound, it will
appear on the internal LED, and it
will appear on the remote display.
1. This function helps to remove accumulated dirt,
bacteria, etc. from the internal evaporator.
2. This function will run for about 30 minutes and return
to preset mode. You can press the
button to cancel this function during the process.
You will hear 2 beeps when it is finished
or canceled.
It is normal for some noise to occur during this
process of operation, since plastics do
they expand with heat and contract with cold.
We suggest to activate this function in the following
environmental conditions to avoid certain functions of
security protection.
n
Unit temp. I
backhoe <86
41
Outdoor unit
or
It is recommended to use this feature
every 3 months.
8
C.heating function (optional)
or
EC
OR
1. Long press
this function, and
or
8the remote display.
Repeat to deactivate this function.
2. This function will automatically start the heating mode when
the room temperature is
less than 8 (46
F), and it will return to standby if
or
the temperature reaches 9
3. If the ambient temperature is above 18
(64
F), the appliance will automatically cancel this
or
function.
button
AC will be
want
C)
FA (30
or
or
C) <Temp <86
FA (5
or
or
button over 3 seconds to activate
C.(46
F.) will appear on
or
C.
or
C (48
F).
or
or
C.
or
Gentle wind function (optional)
1. Turn on the indoor unit and switch to COOL mode,
then press al
together 3 seconds to activate this
function, will appear on the display.
Do it again to turn it off.
2. This function will automatically close the vertical flaps and give
you the pleasant feeling of light wind.
Health
1. Turn on the indoor unit first, press HEALTH to
activate this function, will appear on the display.
Do it again to turn it off.
2. When the HEALTH function is started, the ionizer /
plasma / bipolar ionizer / UVC lights (depending on
the models) will turn on and run.
MOLD PROOF (Optional)
1. In COOLING / DRYING mode
press the button to activate this
function, and the remote display shows;
C)
FA (30
2.When the air conditioner is turned off from mode
or
COOLING / DRYING, the indoor unit will continue to
run for about 15 minutes to dry the indoor unit;
3.Press it again or select other modes to cancel
this function.
12
F.
TO
u
n
go
function(Optional)
TO
And
MUT
button
No.
And
NTIMUFFA
,
want
Publicidad
