CF Vitalia SWITCH CONNECT Manual De Instalación página 10

REINITIALISING THE SWITCH CONNECT
If you forget your password, you can reinitialise your SWITCH CONNECT (be aware though
that your SWITCH CONNECT will be set back to factory settings and any information you
have input will be lost). To do this, turn the SWITCH CONNECT off, press the maintenance
button and then turn the SWITCH CONNECT back on while still pressing the maintenance
button until the maintenance indicator light switches off (you need to keep pressing the
button throughout the operation). Then repeat the operations you carried out when
configuring the unlocking system, personalising the network name and configuring remote
connection.
RÉINITIALISATION DE LA SWITCH CONNECT
SWITCH CONNECT MAINTENANCE MODE
En cas d'oubli du mot de passe, il est possible de réinitialiser votre SWITCH CONNECT (attent
en configuration-usine). Pour ce faire, mettre hors tension la SWITCH CONNECT, appuyer sur
The SWITCH CONNECT clock includes a maintenance mode that provides control of all
en maintenant l'appui sur le bouton de maintenance jusqu'à ce que le voyant de maintenanc
equipments managed by the device, without the need to use a Smartphone. Activation
l'opération). Répéter alors les opérations de configuration du schéma de déverrouillage, de pe
and deactivation of maintenance mode can be carried out by pressing the maintenance
button (which has a hand symbol) for 5 seconds until the corresponding indicator light
switches off. Once maintenance mode has been activated, press the button (on the front
MODE MAINTENANCE DE LA SWITCH CONNECT
of the SWITCH CONNECT) that corresponds to the device you wish to control. Maintenance
L'horloge SWITCH CONNECT contient un mode maintenance permettant la commande de
mode will be deactivated automatically after 30 minutes of inactivity.
Smartphone. L'activation et la désactivation du mode maintenance se fait en appuyant sur le
que le voyant correspondant s'éteigne. Une fois le mode maintenance activé, appuyer sur le
vous souhaitez commander. En cas d'oubli, le mode maintenance se désactive automatiquem
POSITION OF THE FUSE ON THE ELECTRONIC BOARD
POSITION DU FUSIBLE SUR LA CARTE ÉLECTRONIQUE
To replace the SWITCH CONNECT fuse, unscrew the 4 screws on the front in order to
Pour le remplacement du fusible de protection de la SWITCH CONNECT, il suffit de dévisser le
access the electronic board where the fuse is located.
fusible.
ENTRETIEN
SERVICING/MAINTENANCE
Fuse 1 Amp (5x20)
Fusible 1A (5x20)
!! Avant toute opération de câblage : Vérifier, et le cas é
!!Avant toute intervention, couper et verrouiller l
9