Esoteric F-01 Manual Del Usuario página 23

Input source name editing
Name Edit
You can change the names shown on the display for the unit's con-
nectors when you turn the INPUT knob. You can set the names as you
like (up to five characters).
Changing input source names
1. Select the input source to edit.
2. Press the MENU button repeatedly to show Name Edit.
3. Press and hold the MENU button.
XLR1: ***** appears when the input source is XLR 1.
4. Enter the characters.
The character being input and the cursor appear alternately.
Use the ESL-A/XLR input selection buttons or the main unit
INPUT knob to select characters.
5. Move the cursor.
Use the setting adjustment (l/;) buttons to move it.
6. When finished with input, press and hold the MENU
button.
o Press the OUTPUT button to cancel input.
o While inputting characters, the input source cannot be
changed.
o Available characters
English letters: A–Z, a–z
Numbers: 0–9
Symbols: ! " # $ % & ' ( ) * + , − . / \ : ; < = > ? @ (blank)
o Using blank spaces for all five characters will clear the input
source name.
23