Esoteric F-01 Manual Del Usuario página 24

MENU 2
In MENU 2, settings can be made for the display and the unit as a
whole.
Volume display mode
VolM>***
This sets how the volume is shown.
o By default, the setting is dB.
STEP
This shows the volume as a value of 0.0 – 99.9.
dB
This shows the volume in decibels.
Preamp gain
Gain>***
This switches the gain of the preamp section.
o By default, the setting is +12dB.
o This setting value is the maximum gain of the preamp section.
o After this setting is changed, the output will be muted.
o Depending on the speakers and headphones being used, increasing
the preamp gain could cause white noise to become noticeable.
Reduce the gain in such cases.
0dB
The gain is 0 dB.
The volume can be set to −∞ dB and adjusted from −99.9 dB to
0 dB.
+6dB
The gain is +6 dB.
The volume can be set to −∞ dB and adjusted from −99.9 dB to
+6 dB.
+12dB
The gain is +12 dB.
The volume can be set to −∞ dB and adjusted from −94.9 dB to
+12 dB.
+18dB
The gain is +18 dB.
The volume can be set to −∞ dB and adjusted from −89.9 dB to
+18 dB.
Headphone amp gain
HPVol>***
This sets the headphone amp gain.
This can be set to values between 0 dB and +18.0 dB in 3dB increments.
o By default, the setting is 0 dB.
24
Fade-in/out time
Fade>***
The fade-in/out time used when muting and unmuting becomes
longer in order from TM1 to TM3.
o By default, the setting is TM2.
Mute level
MTLV>***
This sets the volume when it is muted.
o By default, the setting is −
− dB
The volume becomes −∞ dB when muted.
−20dB
The volume is reduced 20 dB from the set level when muted.
Automatic display darkening
DPaOFF>***
Use this to set the display to darken automatically.
o By default, the setting is OFF.
ON
If no operation is conducted for ten minutes, the display automati-
cally turns off.
DIM
If no operation is conducted for ten minutes, the display will dim
to DIMMER 1 brightness.
OFF
Automatic display darkening will not occur.
o We recommend setting this to "ON" because brightness irregulari-
ties might occur if the same information is shown without change
on the display for a long time.
dB.