VOSS.farming impuls Instrucciones De Uso página 29

INSTRUCTION MANUAL VOSS.FARMING IMPULS
Icon Meaning
Documents the product' s compliance with EU directives
Documents the compliance of the product with the guidelines of the United
Kingdom.
Protection class II for electrical products; double insulation
Read the instruction manual
IP 44
Splash-proof in accordance with protection class IP 44
Connection to mains power supply
5.2 OPERATING PRINCIPLE AND DESCRIPTION OF ENERGISER
An electric fence consists of an energiser and an insulated fence. The energiser supplies the fence
with short electrical pulses. The electric fence presents a "physical" and "psychological" barrier to
animals. The electric fence energiser emits an electrical pulse through the fence about once every
second. The pulse gives the animal a short, sharp, yet harmless shock. This is in no way dangerous
for the animal, but is enough that it will remember to avoid the fence in future. A properly installed
electric fence can provide a high level of safety and has many advantages compared to a purely
mechanical fence. As a psychological barrier, the electric shock discourages animals from trying
to get over the fence. Less work and fewer materials are required, alterations are easily made, it
is suitable for a very wide range of animals and offers a great deal of protection against injury.
The high-power VOSS.farming impuls energisers are suitable for long fences and fences that
are affected by plant overgrowth, where maximum efficiency and reliability are required. The
integrated microprocessor controls the entire operating process, ensuring optimum performance
in terms of condition of the fence and the current situation.
The load on the fence is constantly measured during operation. The power output of the VOSS.
farming impuls energiser is automatically adjusted in order to maintain the desired output voltage
within the maximum load range. In this way, energy consumption is adjusted to the state of the
fence. A good fencing system with little overgrowth ensures minimal consumption, while poorer
fence systems are automatically adjusted using more power. This control system makes a major
contribution to energy saving if high-quality fences with little overgrowth are used.
5.3 EXPLANATION OF THE LED INDICATOR LAMPS
LED indicator lamp (status control)
Steady light: indicates normal operation via the mains supply
LED control lamp (pulse control)
Flashing: displays the intervals between pulses
Meaning of the colours
∙
green: Normal operation
∙
red: Warning when fence voltage drops below 3 kV
41250 - 04.2023 - V7
DE
EN
FR
IT
NL
SV
ES
29