Forum Technologies Wirele-X Manual Del Usuario página 11

7. Battery Charging
Wirele-X a battery-operated portable device which is powered by a lithium-ion rechargeable
battery.
When the battery is depleted BAT LOW indicator will start blinking (Pic. 8). Wirele-X will
continue normal operation even with low battery for several treatments before the device
shuts down.
To charge the battery:
7.1 Complete the measurements and disconnect the Measurement cable from the
patient.
7.2 Unplug the Measurement cable from the device.
7.3 Connect the charger to the mains.
7.4 Plug charger cable into the device receptacle.
7.5 When the battery is charging, BAT LOW indicator will Blink red color.
7.6 When charging is completed BAT LOW indicator will turn off and blue color LED
around the on/off button will turn on.
While charging, the charger and the device should be outside patient
environment (at least 1.5 m from the patient).
If the battery is completely flat and the device would not turn on, contact your local distributer
for battery replacement.
Pic. 8
- 9 -