8.
Maintenance, cleaning and sterilization
8.1
General
The device does not contain user serviceable parts. The service and repair should be
provided by factory trained service personnel only.
The Wirele-X Display should be cleaned using tissue or soft cloth impregnated with
aldehyde free disinfecting and detergent solution (a bactericidal and fungicidal).
9.
Troubleshooting
Please review the suggested solutions before calling customer service.
#
Device does not power on or system
1
crashes
The touch screen does not work or is
2
not sensitive
The device cannot access the
3
internet via a wireless network
The device cannot wake up from
4
sleep mode
10.
Warranty
Wirele-X Display is warranted for 12 months from the date of purchase. The accessories
(cables, batteries, etc.) are warranted for 6 months from the date of purchase. Within the
warranty period the manufacturer undertakes, at its sole discretion, to repair or replace the
faulty item without charge.
This product has been developed specifically for use in dentistry and is intended to be
operated only by qualified dental professionals in accordance with the instructions contained
in this manual. However, notwithstanding anything contained herein, the user shall at all
times be solely responsible for determining the suitability of the product for the intended
purpose and the method of its use. Any guidance on technology application offered by or on
behalf of the manufacturer, whether written, verbal or by demonstration, shall not relieve the
dental professional from his/her obligation to control the product and to make all professional
judgments regarding its use.
Except for the warranties specifically set forth in this manual, the manufacturer provides no
warranties or guarantees of any kind covering the product, expressed or implied, including,
without limitation, any warranties as to merchantability or fitness for a particular purpose.
Any claim for damage or breakage to the product in transit should be made to the carrier
promptly upon discovery.
Problem
Please first charge the battery for half an
hour, then press and hold the power
button to force the power off. Finally,
press the power button to boot normally.
Please press the power button first,
forced shutdown. Then, press the power
button to boot normally.
Restart the wireless router or go to
Settings and restart Wi-Fi.
Please press the power button first,
forced shutdown. Then, press the power
button to boot normally.
- 21 -
Solution