Forum Technologies Wirele-X Manual Del Usuario página 31

6.1 Cable connection test
Connection test feature is intended to check the integrity of the cables:
6.1.1 Insert the Measurement cable with attached Lip Clip and File Clip into the Wirele-
X receptacle. "Cable Connection"
of the display, indicating proper connection.
6.1.2 Verify that the File Clip contact and the Lip Clip are clean and make connection
between them.
6.1.3 "Cable Test"
indicating proper contact.
6.1.4 If the
Clip should be replaced.
Cable Connection
symbol
symbol should appear on the status bar of the display,
symbol does not appear, the Measurement cable or the File
- 8 -
symbol should appear on the status bar
Cable Test symbol