Before Use; How To Use; How To Install Filter - Coway Airmega 230 Manual Del Usuario

BEFORE USE

Please check before use!
This product is for 120 V~, 60 Hz only.
Make sure to connect the power plug to a grounded 120 V~, 60 Hz outlet.

How to Install Filter

Tips
1. Open the front cover.
Pull the top of the front cover to open it.
2. Take out the lter and remove the packaging plastic wrapping.
Remove the packaging plastic from all filters except the pre-filter and assemble the product according to
the filter assembly sequence.
3. Close the front cover.
Align the two projections on the bottom
of the front cover with the grooves and
push in the cover to fix it.
* The product will not operate if the
front cover is not fixed correctly.
- Be sure to remove the packaging plastic wrapping before installing the lter.
- Use the lter indoors only.
- Unplug the power cord from the outlet when not using the product.
- Check the front of the lter when installing it.

How to Use

ENGLISH / 10