Publicidad
Idiomas disponibles
Idiomas disponibles
- The cover with the lter attached may damage if it is dropped while
moving, so do not move it upside down.
Tips
- Max2 lters are consumables.
How to Replace Max2 lter (Replace every 12 months)
PRE LED: Pre- lter
MAX2 LED: Max2 lter
1. Open the front cover and remove the lter set entirely.
* It prevents dust generation inside the space.
2. Move to where the lter replacement is possible and separate the
Max2 lter.
3. Clean / Wash the area except for the lter and dry it before
assembling the new lter.
* Check the front display of the lter.
* Assemble the Max2 lter
* Put the Max2 lter, then push the fastening material areas of the frame.
4. After assembling to the product, close the front cover.
5. Reset the indicator by pressing the air quality indicator light on/off
button & lter replacement button for 3 seconds.
Maintenance
3 sec.
ENGLISH / 18
Publicidad
