Coway Airmega Icon Manual Del Usuario página 25

HOW TO REPLACE FILTER
How to Replace
- Refer to the filter installation method on page 15 to replace the filter.
- Be sure to check the front side when installing the filter.
- Use a genuine Coway filter to maintain the optimal performance of the product.
- Always unplug the power cord before replacing the filter.
Filter Cleaning and Replacement Cycle
Filter
Pre-filter
Max2 Filter
· _ I t is based on 24 hours use per day at level 1 speed.
· Filter replacement cycle is a recommendation and may vary depending on environment.
RESET THE USER-SELECTED FILTER REPLACEMENT CYCLE
This instruction is a guide for the next filter replacement maintenance. The filter replacement and cleaning
cycle selected by the user when the user replaces or cleans a filter by themselves before the filter replacement
notification is displayed.
Cleaning/Replacement Time
Once / 2~4 weeks
Once / 12 months
1
Press the filter reset button and light
button at the same time for more than
2 seconds.
2
The pre-filter indicator will start blinking. Then
press the filter reset button to select the filter
that needs to be replaced or cleaned. Also, if
you press the filter reset button for more than
2 seconds, the selected filter option will reset.
· A filter is selected in the following order. 
Pre-filter → max2 filter → pre-filter & max2 filter →
pre-filter
· I f you do not reset the filter and press the light
button and the filter reset button again at the same
time for about more than 2 seconds, or if you do not
press the mode button or the filter reset button for
10 seconds, the filter is automatically canceled.
If you replaced or managed the filter before a filter
•
replacement alarm is displayed, reset the filter
replacement cycle using the user-selected filter
replacement cycle reset function.
A djusting the sensitivity of air quality sensor and
•
resetting the user-selected filter replacement cycle
have the same entering and canceling method.
Cleaning/Replacement
Clean and wash
Replacement
NOTE
24