First time of power ON (Start of installation)
Initialization
Initializing.
«
Start
«
Language
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
Select
Confi rm
«
Set language & confi rm
Clock format
24h
am/pm
Select
Confi rm
«
Set time display & confi rm
Date & time
Year/Month/Day
/ 01 / 01
2022
Select
Confi rm
«
Set YY/MM/DD/Time & confi rm
Front grille
Is O/D front grille fi xed?
No
Yes
Select
Confi rm
«
Set Yes & confi rm if outdoor front grille has been installed
Start
«
Press menu, select Installer setup
Main Menu
System check
Personal setup
Service contact
Installer setup
Select
Confi rm
Confi rm to go into Installer setup
«
12:00pm,Mon
When power is ON, fi rstly initialization screen
appears (10 sec)
12:00pm,Mon
When initialization screen ends, it turns to normal
screen.
When any button is pressed, language setting screen
12:00pm,Mon
appears.
(NOTE) If initial setting is not performed, it does not go
into menu.
When there are two remote controllers installed from the
beginning, the fi rst remote controller to set and confi rm
language will be recognised as main remote controller.
12:00pm,Mon
When language is set, setting screen of time
display appears (24h/am/pm)
12:00,Mon
Hour : Min
YY/MM/DD/Time setup screen appears
12 : 00
If set No & confi rm, a caution message will
12:00,Sat
be displayed to ensure outdoor front grille is
installed before proceed to operate the unit.
12:00,Sat
Back to initial screen
12:00,Sat
Caution
To prevent injury, fi x
front grille before ope.
[
] Close
21