Beurer BM 45 Manual De Instrucciones página 37

1. To access memory recall mode, the blood pressure mon-
itor must first be started. To do this press the Start/stop
button .
2. After the full-screen display, select the relevant user mem-
ory that you want to see the measurement data for within
3 seconds using the M1 or M2 memory button (M1 for
or M2 for ).
3. Your last measurement will appear on the display.
4. Press the relevant memory button (M1 or M2).
If you have selected user memory1, the M1 mem-
ory button must be pressed.
If you have selected user memory2, the M2 mem-
ory button must be pressed.
Average value
flashes:
The average value of all this user's saved meas-
ured values is displayed.
1. Press the relevant memory button (M1 or
M2).
flashes:
The average value of the morning measure-
ments for the last 7 days is displayed (morning:
5:00–9:00).
2. Press the relevant memory button (M1 or M2).
flashes:
The average value of the evening measurements
for the last 7 days is displayed (evening: 18:00–
20:00).
Individual measured values
1. When the relevant memory button (M1 or M2)
is pressed again, the last individual meas-
urement is displayed (in this example, meas-
urement 03).
2. When the relevant memory button (M1 or M2)
is pressed again, you can view your individual measure-
ments.
3. Press to switch the device off again.
Press to exit the menu.
Deleting measured values
1. To delete all of a user's measured values, select the cor-
responding user.
Start individual measurement access.
2. Press and hold the M1 & M2 memory buttons for 5 sec-
onds.
37