LG CBIH3017BE Manual Del Propietário página 25

Control Panel
Control Panel Features
Locations of Surface Elements and Controls
The position of the cooking zone being controlled is shown in each cooking zone icon on the control panel.
The diagram below is for the 36" cooktop. The 30" control panel only includes 4 cooking zone icons.
Throughout this manual, features and appearance may vary from your model.
Surface elements and controls
Press and hold for 1 second to turn
the entire cooktop ON. When it is
POWER ON, the cooktop is in standby
a
mode until a cooking zone is
activated.
Press the Simmer key with the
cooking zone selected to simmer
sauces or stews.
Simmer
b
The Simmer indicator below each
cooking zone remains off until
activated.
Sets the active cooking zone to
Pause minimum output. Press to activate
c
or deactivate.
Connect the appliance to a home
Wi-Fi
d
Wi-Fi network.
Control Press and hold for 3 seconds to
e
Lock lock the control panel.
Hot Surface Indicator
Surface elements and controls
Check the status of a cooking zone
Cooking and adjust the cooking zone. For
f
Zone details, see "Operating
Instructions".
Press to set a timer. For details,
Timer
g
see "Operating Instructions".
Power Select the power level for the
h
Level cooking zone.
Press to activate the Flex mode.
Flexible For details, see "Using the Flexible
i
Cooking Zone".
Control Panel The LEDs on the control panel turn
Light On/Off off after a few minutes to save
energy. Press the POWER button
to activate the control panel. If the
controls are idle for a few minutes,
the LEDs will turn off again
automatically.
Hot surface indicator
OPERATION 25