Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
• Use caution, if the "
" indicator is displayed, the
H
ceramic-glass surface is hot. Failure to take care
may result in burns or injuries. Refer to the Hot
Surface Indicator section.
Activating the Cooktop
To turn on the cooktop, press the POWER button
for approximately 1 second. The power indicator
LED for each surface element shows "0". To turn
off the cooktop, press the POWER button.
NOTE
• When you turn the power on, after the welcome
lighting the display enters the idle mode and
automatically reduces the display lighting to 50
% brightness. When a button is activated, the
display brightness for that button is increased to
100 %.
• After turning on the cooktop with the POWER
button, you must select one of the cooking
zones within 60 seconds. If no selection is made,
the cooktop will turn off for safety.
Selecting the Cooking Zone
Place an induction-compatible pan on top of the
desired cooking zone.
Press the button for the desired cooking zone to
set the power level. Burner display '0' will blink.
NOTE
• Once the cooking zone has been selected the
power level must be selected within 5 seconds
with the element power settings. Otherwise, the
power settings will turn off for safety.
Readjusting the Power Level
1
Select the desired cooking zone.
2
Press the desired Power Level. The Power
level will be changed after 5 seconds. (If
power level 0 is selected, burner will turn off.)
• If power level shows '
compatible for induction.
NOTE
• Once the power level is changed, the cooking
zone operation is temporarily stopped and then
restarted at the changed power level.
Turning Off the Cooking Zone
1
After cooking is complete, select the desired
cooking zone and change the power level to
'0' to turn off the cooking zone.
2
To turn off all cooking zones, press the
POWER button.
WARNING
• Your cooktop has a residual heat indicator for
each cooking zone. This indicator will warn that
this area has been used and is still giving off
enough heat to cause burns. Avoid touching the
cooking zone.
Power Level Indicator
• Cooking element LED bar
- The range provides an LED bar for each
cooking element on the cooktop. Check the
OPERATION
27
', check cookware is
v
Publicidad
