Publicidad
Idiomas disponibles
Idiomas disponibles
38 TROUBLESHOOTING
TROUBLESHOOTING
Before Calling for Service
Before calling for service, review this list. It may save you time and expense. This list includes common
occurrences that are not the result of a defect in workmanship or materials.
Parts and Features
Problem
Cooktop does not
work
Cooktop does not
heat
Elements turn off
while cooking.
Elements do not get
hot enough.
A fan sound can be
heard.
Noises are heard
during cooking. The
following noises are
normal.
Cooktop controls are locked.
• See Control Lock to turn off the Control Lock feature.
Circuit breaker has tripped or fuse is blown.
• Reset the circuit breaker.
Power outage.
• Check house lights to confirm power outage.
Installation wiring not complete.
• Contact the installer or dealer.
Incorrect cooking zone selected.
• Make sure the correct control is ON for the cooking zone being used.
No power to cooktop.
• See "Cooktop does not work" above.
Cooktop inner temperature is too high.
• Check that cooktop has been installed according to the installation instructions.
Control panel may not be set properly.
• Check the power level.
Cookware that is not marked IH or convection compatible may not heat properly.
• Use cookware with the IH mark.
Cookware may not be flat or the correct shape or size.
• Use cookware with a flat bottom.
• Minimum cookware size
- Use cookware with a bottom surface diameter of 5 13/16" (147 mm) or greater.
- For Flexible Cooking Zone, minimum cookware size is 4 3/4" x 10 5/8" (120 mm x 270
mm)
• For best results when using the Dual cooking zone, use cookware with a bottom surface
that is 11" in diameter or larger.
• Use the recommended cookware. See Induction Cookware.
Cooktop inner temperature is high.
• This is normal.
The cooling fan will run when any element is turned on. With heavy use the fan may
continue to run after the controls are turned off until the cooktop has cooled.
Humming/buzzing sound
• Caused by the magnetic field transmitting power to the cookware. It is most noticeable at
high power settings and becomes quieter if the power is reduced.
Possible Cause & Solution
Publicidad
