Intended Use; General Power Tool Safety Warnings; Electrical Safety - Rothenberger ROCAM mini HD AMPShare Instrucciones De Uso

body-worn operations with the back of the handset kept 0mm from the body. The use of acces-
sories that do not satisfy these requirements may not comply with FCC and RSS-102 RF expo-
sure requirements, and should be avoided.
For 5G RLAN
Operations in the 5150-5250 and 5725-5850 band are restricted to indoor usage only. Any
emission is maintained within the band of operation under all conditions of normal operation.
The max. frequency stability is less than 20ppm.
1.1

Intended use

The user bears sole responsibility for any damage caused by improper use.
Generally accepted accident prevention regulations and the enclosed safety information must be
observed.
The ROCAM mini HD AMPShare inspection system is solely for inspecting pipes, hollow cavities
and hollow spaces, as indicated under Technical data. Other uses are discouraged.
Do not leave camera heads in the sun for extended periods. This can damage the camera mod-
ule! All applicable standards and regulations must be observed.
This tool is only suitable for indoor use. Never expose tool to rain!
Among others, these particularly include:
- Laws on technical equipment (Equipment Safety Act) and associated regulations
- Low Voltage Directive
- UVV VBG 1 „General regulations"
- UVV VBG 4 „Electrical systems and equipment"
- Guidelines for work in containers and confined spaces (BG rule 77), Guideline for work-
stations.
Use only original ROTHENBERGER or AMPShare battery packs and accessories.
Battery packs marked with AMPShare are 100% compatible with AMPShare devices. To select
the appropriate device, please contact your ROTHENBERGER dealer. Read the relevant in-
structions for the devices used.
1.2

General Power Tool Safety Warnings

WARNING! Read all safety warnings, instructions, illustrations and specifications
provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious inju-
ry.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your electrically-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
16 ENGLISH