Publicidad
Idiomas disponibles
Idiomas disponibles
USING YOUR COOKTOP
TURN BURNER(S) OFF
Touch On/Off pad for an individual burner or touch the All
Off pad.
SELECTING COOKTOP SETTINGS
own power levels ranging from low to high. Power level
settings necessary for cooking will vary depending on the
cookware being used, the type and quantity of food, and
the desired outcome. In general use lower settings for
melting, holding and simmering and use higher settings for
heating quickly, searing and frying. When keeping foods
warm confirm selected setting is sufficient to maintain food
temperature above 140°F. Larger elements and elements
marked "Keep Warm" are not recommended for melting.
HOW TO SYNCHRONIZE LEFT ELEMENTS
To Turn On
Hold the Sync Burners pad for about half a second to
connect the two burners. Operate either element as
described on page 10 to adjust power level.
49-2001137 Rev. 1
Hi is the highest power level, designed
for large quantity rapid cooking and
boiling. Hi will operate for a maximum
of 10 minutes. Hi may be repeated after
the initial 10 minute cycle by pressing
the + pad.
CAUTION: Do not place any cookware,
utensils or leave excess water spills on
control key pads. This may result in
unresponsive touch pads and turning
off the cooktop if present for several
seconds.
To Turn Off
1. Touch the On/Off pad on either burner to turn off the
Sync Burners.
or
2. Touch the Sync Burners to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
Low
melting
11
Publicidad
