Oerlikon CITOSTEEL 255C Manual De Instrucciones página 33

Advanced setup
This menu
configuration parameters of the device.
To set the configuration parameters:

Access to the Settings and Configuration Menu.

Use the Right Knob
"configuration menu" icon.
Figure 60.

Press the Right Knob [36]. The Configuration Menu
is shown on the display.

Use the Right Knob [36] to highlight the Parameter
Number which will be changed, for example P.1 -
allows change WFS
"Metric" = m/min.
Figure 61.

Press the Right Knob [36].

Use the Right Knob [36] to highlight the "English" =
in/min.
Figure 62.

Confirm the select – press the Right Button [36].
English
enables access to
[36] to highlight
units, factory default:
the
the
29 English