Num'axes PIE1069 Manual De Instrucciones página 28

GENERAL MENU (displayed by default)
Mode
PIR interval
PIR sensor sensitivity
Time Lapse
Cycle recording
Settings
Mode
PIR interval
PIR sensitivity
Photo
00:20
High
OFF
ON
Programmable options
(default settings in bold characters)
Photo | Video | Photo + Video
− Photo: the camera will only shoot photos.
− Video: the camera will only shoot videos.
− Photo + Video: upon the same trigger event, the
camera will shoot photo(s) first then a video.
Default PIR interval: 20 seconds
Programmable from 5 seconds (00:05) to 59 minutes
59 seconds (59:59)
Allows you to set the desired time interval between
photos/videos upon motion detection by the PIR sensor.
Example: if the PIR interval is set to "01:00", the camera
will wait 1 minute between photo/video recordings with
motion.
High | Medium | Low
With the PIR sensitivity set to High, the PIR sensor:
‒ is more sensitive to movements by smaller
subjects;
‒ offers longer detection distance;
‒ can more easily detect a difference between body
heat and outdoor temperature;
‒ can more easily trigger the camera.
In high temperature environment, subjects body heat
and environment temperature are hard to tell by the
camera, the suggested setting is high.
However, it is recommended to use low PIR sensitivity in
environments with lots of interference like hot wind,
Guide PIE1069 – Mai 2023 – ind. A - 28/116
IR LED brightness
Low power night capture
Operating periods
Frequency
Auto
No capture
OFF
60 Hz