Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
6.8
DOOR OPENING REVERSAL
To reverse the door's opening direction, proceed as follows:
- open the appliance's door, see paragraph
- loosen the screws and remove the handle (1)
- loosen the two screws (2) and remove the door (3)
- remove the two side plates (4) and the door closing hook (5)
1
3
x2
2
- invert the position of the handle (1), of the side plates (4) and of the
door closing hook (5)
- invert the opening of the door (3), fasten it with the screws (2) and
check that it closes/opens perfectly.
4
x2
4
5
CS.STB.IST-1_EN_Rev.1.0_08-23
"Opening the
door"
4
x2
4
5
Fig. 23
1
3
2
x2
Fig. 24
6.9
ASSEMBLING THE FIRE BRICKS
l
The product is supplied with side and upper fire
bricks that are dismantled to prevent them from
breaking during transport; they must be installed
only at the end of the installation phase.
a
Handle the refractory bricks very carefully as they do
not withstand impacts.
To mount the fire bricks, proceed as follows:
- open the door of the appliance, consult the paragraph
door"
- position the side bricks (1)
1
- subsequently, mount the upper bricks (2); support the side bricks
during the operation to prevent them from falling
- insert the locking profile (3).
2
"Opening the
1
Fig. 25
3
2
Fig. 26
EN
19
Publicidad
