Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
3.
Close the cap after all.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to
adjust the consumption by user. Follow the below steps.
1.
Close the door, switch on the appliance.
2.
Within 60 seconds after step 1, press the Rapid button more than 5 seconds, and then press
the Delay button to enter the set model, the rinse aid indication blinks as 1Hz frequency.
3.
Press the Rapid button to select the proper set according to your using habits ,the sets
will change in the following sequence: d3 d4 d5 d1 d2 d3, The higher the number,
the more rinse aid the dishwasher uses.
4.
Without operation in 5 seconds or Press the Power button to end the setup model.
26
EN
Publicidad
