Ducati DPS3202 Manual De Instrucciones página 32

English
Owner´s manual
WARNING! Progressive cutting on older pruning shears models
Only if you have purchased your DPS3202 and DPS4202 shears, from 2023 onwards, the
progressive cutting mode is activated as described above.
* If you do not proceed to activate/deactivate the progressive cutting mode when following this
sequence of steps, you have an older model. To activate/deactivate the progressive cutting mode
in these cases, follow the instructions described in the step "Activation/Deactivation of the anti-
cutting mode" described below.
Activation of the anti-cut system (DPS3202)*
With the anti-cutting system activated, the scissors will detect if any of the blades are in contact
with the skin, and will block the movement of the blades.
To activate or deactivate this mode, once you have turned on the scissors and before double-
clicking to activate cutting, press the trigger and hold it down for 10 seconds until the scissors
beeps.
To verify that the anti-cutting mode has been correctly activated, place your finger on the fixed
blade on the flat side, making sure that it does not come into contact with the blade edge. The
scissors will then beep without the need to press the trigger. This indicates that it has been
properly activated, and if the trigger is pressed, the scissors should not move.
WARNING! Anti-cutting system on older pruning shears models
Only if you have purchased your DPS3202PS shears from 2023 onwards, they are equipped
with the anti-cutting mode.
* If after performing the process, your DPS3202 scissors instead of activating the anti-cutting
system, you see that the progressive cutting mode has been activated/deactivated, your DPS3202
scissors do not have the anti-cutting system.
Automatic shut-off
When the scissors are not used for more than 10 minutes, it beeps and turns off automatically.
To return to work mode, press the power button again.
32
DANGER! Anti-cut system
The sensor of the anti-cut system is affected by the use of gloves or use in
humid environments, so its activation is not recommended in these cases.
WARNING! Anti-cut system
The anti-cut system is a safety system that reduces the risk of cutting,
although this risk is always present. Exercise caution when using the
scissors.