Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL WARNINGS
• Only use the specified power cord. If the power cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
• The product must be properly grounded at the time of installation, or electrical
shock may occur.
• For all electrical work, follow all local and national wiring standards, regulations,
and the Installation Manual. Connect cables tightly, and clamp them securely to
prevent external forces from damaging the terminal. Improper electrical
connections can overheat and cause fire, and may also cause shock. All electrical
connections must be made according to the Electrical Connection Diagram
located on the panels of the indoor and outdoor units.
All wiring must be properly arranged to ensure that the control board cover can
close properly. If the control board cover is not closed properly, it can lead to
corrosion and cause the connection points on the terminal to heat up, catch fire,
or cause electrical shock.
If connecting power to fixed wiring, an all-pole disconnection device which has at
•
least 3mm clearances in all poles, and have a leakage current that may exceed
10mA, the residual current device(RCD) having a rated residual operating current
not exceeding 30mA, and disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
If the SUPPLY CORD damaged, it must be replaced by the manufacturer,
•
its service agent or similarly qualified persons in order to avoid a hazard.
WARNINGS FOR PRODUCT INSTALLATION
•
Installation must be performed by an authorized dealer or specialist. Defective
installation can cause water leakage, electrical shock, or fire.
•
Installation must be performed according to the installation instructions.
Improper installation can cause water leakage, electrical shock, or fire.
(In North America,installation must be performed in accordance with the
requirement of NEC and CEC by authorized personnel only.)
Contact an authorized service provider for repair or maintenance of this unit.
•
This appliance shall be installed in accordance with national wiring regulations.
Only use the included accessories, parts, and specified parts for installation.
•
Using non-standard parts can cause water leakage, electrical shock, fire, and
can cause the unit to fail.
•
Install the unit in a firm location that can support the unit's weight. If the chosen
location cannot support the unit's weight, or the installation is not done properly,
the unit may fall and cause serious injury and damage.
Install drainage piping according to the instructions in this manual. Improper
•
drainage may cause water damage to your home and property.
•
For units that have an auxiliary electric heater, do not install the unit within 1
meter (3 feet) of any combustible materials.
• Do not install the unit in a location that may be exposed to combustible gas
leaks. If combustible gas accumulates around the unit, it may cause fire.
5
V.1
Publicidad
