6
Fresh air duct installation (low pressure)
Dimension :
Motor and drain pump maintenance (low pressure)
7
(The rear ventilated panel is used as an example)
1) ) Motor maintenance
1.
Take off the ventilated panel.
2.
Take off the blower housing.
3.
Take off the motor.
Duct joint for fresh air
MODLE
9-18k
Ø92mm(3.62")
Motor
Blower housing
Ventilated panel
Ø113mm(4.45")
2) ) Pump maintainance
1.
Remove four screws from the drain pump.
2.
Unplug the pump power supply and water
level switch cable.
3.
Detach the pump.
27
Pump
V.1