Moulinex i-Companion pro Manual De Instrucciones página 22

USING THE CONTROL PANEL (B)
Selecting an automatic program:
EN
Sauces
Soups
(P1 for smooth soup / P2 for soup
with a coarser texture.)
Slow cook (stews)
(P1 for vegetable stews / P2 for
meat and poultry stew /
P3 for risotto)
Selecting custom settings:
Selecting the motor speed.
2 intermittent speeds (Speed 1 &
2) and 10 continuous progressive
speeds (Speed 3 to 12)
Selecting cooking temperature
From 30° to 150°C.
Heating indicator light: it lights up
when cooking starts and switches
off when the temperature inside
the bowl falls to below 50°C.
Selecting operating time.
From 5 sec to 2 hours.
Use of the integrated scales
The UNIT key allows you to change
the weight unit (g, cl, ml, oz).
Tips for use:
Your appliance is fitted with a microprocessor that controls and analyses its stability. In the event of
instability, the motor rotation speed will be automatically reduced, if this instability continues, the motor
will be stopped and "STOP" will be displayed on the screen. If this happens:
• Check that the quantity of ingredients is not too large and that the speed used is the correct one.
• Check that you are using the recommended accessory.
• Then restart your appliance normally.
Steam cooking
(P1 gentle steam / P2 high
steam)
Pastry
(P1 for bread / P2 for
brioche / P3 for cake)
Desserts
Increase speed, cooking
temperature and duration.
Decrease speed, cooking
temperature and duration.
This button has 3 functions:
- "Validation" of the
choice of your automatic
program or your settings
chosen in the context
of manual use (speed,
cooking temperature
time).
- "Pause" during use,
once the appliance has
been started up.
- "Reset" of the settings
selected on
appliance by pressing
for 2 seconds.
32
USING THE APPLIANCE
Plug in the appliance, set the On/Off switch (H) to 1, and the LCD screen (C) displays all settings
at "0" (See Fig. 9)
AUTOMATIC PROGRAM MODE
1- Press the program of your
choice (B1), a triangle ap-
pears on the screen (C4) In
the case of the soups, slow
cook, steam and pastry pro-
grams, successively pressing
the program button takes you
to the different sub-programs.
2- The pre-programmed set-
tings can be modified for
the time of a recipe (depen-
ding on the chosen recipe,
ingredients and quantities
prepared). Press the speed
selector (B2) or the cooking temperature selec-
tor (B3) or the time selector (B4), the setting
chosen will flash on the screen (C1-C2-C3).
3- Adjust the setting(s) using
the +/- selector (B6).
4- When you have finished mo-
difying all your settings, press
the "start" button (B7) to
start the program. When your
appliance is using cooking
mode, the red indicator light
(B3) lights up to inform you that cooking has started.
the
5- When the program has ended, the appliance emits
3 beeps.
6- At the end of the sauce, soup, slow cook pro-
grams P2 and P3, steam cooking and desserts,
the appliance automatically changes to keep warm
mode for 45 minutes to maintain the prepara-
tion ready for serving. In the 'sauces' program,
P2 and 'slow cook' P3 program, desserts and
manual mode, the appliance motor functions at
a specific speed, in order to preserve the pre-
paration and avoid it sticking to the bottom
of the bowl. To stop keep warm mode, simply
press the "stop" button (B7). If you open the
lid, press the locks (D2) or remove the bowl and
keep warm mode will be automatically stopped.
At the end of the sauce programs, slow cook P2 and
P3 and the dessert program; during the keeping warm
function, the motor will continue to operate so that
the ingredients do not stick to the bottom of the bowl.
At the end of kneading in the pastry programs P1 and
P2, the appliance changes to "dough rising" mode at
30°C for 40 minutes for your dough to prove. If you
open the lid, press the locks (D2) or remove the bowl,
the appliance changes to pause mode and you have the
possibility of restarting it by pressing "start" again.
If you wish to stop this mode, press and hold the
"stop" button for 2 seconds.
7- Press the locks (D2) and then remove
the bowl assembly (D) (See Fig. 12).
When the automatic program has started up, you
have the possibility of stopping the appliance at any
time by pressing the "stop" button. The automatic
program is then in pause mode, you have the pos-
sibility of restarting by pressing the "start" button
again. If you have chosen the wrong program and
if you want to cancel it, press and hold the "stop"
button for 2 seconds.
33
EN