Publicidad
Idiomas disponibles
Idiomas disponibles
Remove rubber pads from the back of the
main frame. Cut the tree (cm 25 x 4) us-
ing a chainsaw allowing the stabilisation
plate (7) to fit inside.
Attention! Do not use this type of in-
stallation if the cut may reduce tree
strength.
Install the main frame using the straps
(follow instructions for "Light" installation).
Safe Working Load for this installation
is:
1200 kg (with Winch), 1500 kg (de-
scending brake).
7
Use
7 1 Control Checks
Read and understand the instruction manual before using the device.
If you have any doubt please contact the manufacturer or the distributor.
Before any use check the device as follow:
check the metal parts for deformations, damages, cracks, rust on:
•
• main frame
• stabilisation plate
• anchor rings
• guides
rigging chain (rope, block, slings, carabiners etc.)
•
Also check:
tree and rigging point strength
•
rope angles
•
rules and laws
•
security and emergency plan
•
user training grade and knowledge of tree rigging operations
•
Attention! Do not use the device if any of the control checks above
failed, or if there is any doubt concerning the strength of one of the
components of rigging system.
Fig 5
• descennding brake
• winch
• straps
• identification plates
ENGLISH | 23
Publicidad
