Publicidad
Idiomas disponibles
Idiomas disponibles
Each stretch should last approximately
30 seconds, do not overexert the
muscles. If you feel pain, STOP.
Keep these instructions safe for
future use.
ASSEMBLY INSTRUCTIONS.-
Take the unit out of its box and make
sure that all of the pieces are there
Fig.0:
The assistance of a second person
is recommended when assembling
this unit.
(1)
Main body.
(50)
Tablet holder.
(51+52) Console with support tube.
(53)
Front support plate I.
(54)
Front support plate II.
(55)
Front stabilizer.
(58)
Aluminium rail.
NUTS & BOLTS.
(94) Screw M5x16.
(103) Nut M8.
(105) Screw M8x100.
(106) Screw M6x15.
Wrenches.
1.-
Attach the front support plate I (53)
and the front support plate II (54) to
the front stabilizer (55) using the
screws (106), Fig.1.
2.-
FITTING
SUPPORT.-
Take the front support (55) and insert
it into the main body (1), Fig. 2, secure
it using screws (106).
THE
FRONT
3.- FITTING THE ALUMINIUM
RAIL.-
Raise the main body by pulling the
pedal strap, Fig.3A – 1.
Hook the main body shaft into the hole
under the rail (58), Fig.3A – 2.
4.- FITTING THE MONITOR.-
Attach the console support tube(52) to
the console fixed bracket (7) using the
screw (94), (105) and the nut (103),
Fig.4.
Attach the Tablet holder (50) to the
console (51) with the screws (113),
Fig.4.
5.- MOVEMENT & STORAGE.-
The unit is equipped with wheels (68)
to make it easier to move. The wheels
located at the front of your unit make it
easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Fig.5.
Store your unit in a dry place,
preferably not subject to changes in
temperature.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
10
Publicidad
