Publicidad
Idiomas disponibles
Idiomas disponibles
Conforms to relevant safety standards.
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice.
Read the instruction manual.
IV- Getting Started
1 ACCESSORIES
This SLIDE COMPOUND MITRE SAW comes with the following accessories:
24 Teeth blade (fitted)
Dust bag
Work clamp
Blade socket wrench
Side support bar (x 2)
6mm
Hex keys
2 TRANSPORTATION
Lift the mitre saw only when the saw arm is locked in the down position, the saw is switched off and the plug is
removed from the power point.
You must only lift the saw by the carrying handle (8) or outer castings. Do not lift the saw using the guard or
operating handle (7).
3 BENCH MOUNTING
The saw base has holes to facilitate bench mounting.
Attach the saw to a level, horizontal bench or work table using bolts (not supplied) though the fixing holes in the
saw base.
NOTE! If desired, you can mount the saw to a piece of 13mm or thicker plywood which can then be clamped to
your work support or moved to other job sites and reclamped.
CAUTION! Make sure that the mounting surface is not warped as an uneven surface can cause binding and
inaccurate sawing.
EN
7
Publicidad
