8.2.4 Machine warnings
Select the
button to see the machine's current
warnings.
Should any warnings occur, we recommend that you
ring the Technical Support by calling the number shown
on the display.
To exit, press the
Should a warning occur, ring the Technical Support by calling the
number shown on the display and turn off the machine.
Warnings
Steam heating unit temperature probe has overheated or short-circuited
Steam heating unit temperature probe is disconnected or cut off
Cup warmer temperature probe has overheated or short-circuited
Cup warmer temperature probe is disconnected or cut off
Steam nozzle probe has short-circuited
Steam nozzle probe is disconnected or cut off
Fillingup timeout warning
8.2.5 Autosteamer temperature
Select the
button to programme the tempera-
ture of the steam wand:
Use the
and
ER TEMP.";
use the
and
perature;
to confirm, press the
to exit, press the
USER manual
button.
arrows to set the "AUTOSTEAM-
arrows to set the desired tem-
button;
button.
Warning data is corrupted
Change filter warning (90% worn)
Filter completely worn warning
Maintenance warning
Heating unit heating timeout warning
Volumetric counter warning for each group
AUTOSTEAMER TEMP.
AUTOSTEAMER TEMP.
Core600
Alarm timeout Fill-out
Tel. 00000000000
60
°C
65
°C
71
of
300