Publicidad
Idiomas disponibles
Idiomas disponibles
Hygienic reprocessing at
home
Cleaning
WARNING:
Clean the nebuliser handset (incl. aerosol
head) immediately after each application.
NOTE:
Rinsing all the parts of the nebuliser hand-
set and the aerosol head in warm tap
water straight after use prevents medica-
tion residue from accumulating, for exam-
ple. This helps you to prevent potential
extension of the nebulisation time due to
partial closure of the pores in the
membrane.
• Rinse each side of the aerosol head for
5 seconds each in warm tap water
(water of drinking water quality, temper-
ature up to 37 °C).
• Rinse all parts of the nebuliser handset
for approx. 5 seconds.
• Place all nebuliser handset parts as well
as the aerosol head in warm tap water
with a few drops of clear liquid dish soap
for 5 minutes. Use a clean bowl for this.
CAUTION:
Do not use a brushes or any other tools
to clean the aerosol head as they may
cause damage to the product
components.
®
eBase
Controller - 2022-09
• Rinse all nebuliser handset parts and
the front and back of the aerosol head
thoroughly under running tap water.
• Shake all parts to remove excess water
more quickly.
• Place all nebuliser handset parts on a
dry, clean and surface and allow to dry
completely.
CAUTION:
Moisture promotes the growth of bacte-
ria. Please ensure adequate drying after
each cleaning.
en
17
Publicidad
