Descargar Imprimir esta página

Pari eBase Controller Instrucciones De Uso página 30

Ocultar thumbs Ver también para eBase Controller:

Publicidad

Idiomas disponibles

Idiomas disponibles

Materials used
This product consists mainly of the follow-
ing materials:
- Controller:
thermoplastic elastomers, acetonitrile
butadiene styrene, polypropylene
- Nebuliser handset (incl. aerosol head):
polypropylene, thermoplastic elasto-
mers, polyoxymethylene, silicone
rubber, stainless steel
- Mouthpiece:
polypropylene, silicone rubber
The nebuliser handset contains no parts
made from natural rubber (latex).
Operating conditions
- Ambient temperature:
+5 °C to +40 °C
- Relative humidity of ambient air:
15% to 93% (non-condensing)
- Air pressure:
700 hPa to 1060 hPa
Users can operate the device both at
home and when out and about. Its use on
trains and aeroplanes is restricted to
passenger areas only. If using the device
in a car, it must be operated with battery
power.
Within professional healthcare facility
environment, the device must only be
used in in-patient wards and intensive
care units. The device must never be used
in areas exposed to elevated magnetic or
electrical radiation (e.g. in the vicinity of an
MRI scanner).
26
CAUTION:
When using portable wireless communi-
cation devices, you must ensure that a
distance of at least 30 cm is maintained
between all parts of the nebuliser system
and these devices (including their acces-
sories, e.g. antenna cables or external
antennas). Otherwise, the performance of
your nebuliser system may deteriorate.
CAUTION:
The controller must not be placed directly
beside or on top of other devices for oper-
ation. If operation beside or on top of other
devices is necessary, the controller must
be monitored constantly to ensure proper
operation.
Storage and transportation
conditions
- Temperature: -25 °C to +70 °C
- Relative humidity of ambient air:
0% to 93% (non-condensing)
- Air pressure: 500 hPa to 1060 hPa
NOTE:
Moisture from condensation can impair
the controller's functional capabilities.
Therefore, you should avoid extreme
temperature fluctuations. Wait until the
controller has reached room temperature
before beginning an inhalation session.
If the device is not expected to be used for
a prolonged period, the batteries or
rechargeable batteries must be removed.
Info:
Batteries vary considerably in terms
of storage life and output depending
on battery quality. The lifetime of
about 90 minutes can only be
achieved with the delivered
batteries (4x).
eBase
®
Controller - 2022-09

Publicidad

loading

Este manual también es adecuado para:

678g1020