Julabo Peltier TE400 Manual Del Operacion página 113

NOTE
Damage to the fins of the heat exchanger due to improper
handling of the unit
Damaged fins of the heat exchanger lead to a reduced cooling capacity.

Take care not to damage the fins of the heat exchanger when
cleaning the heat exchanger.

Air pressure used to clean the fins must be controlled to prevent
damage to the fins.

If the fins of the heat exchanger are not in a suitable condition, the
unit must only be used again once the damage has been rectified.
Requirements
 Unit prepared for maintenance. Refer to Preparing the Unit for Maintenance.
Required Tools and Materials
 Vacuum cleaner
 Compressed air pistol/pressurized air spray
 Hand brush
 Brush
Procedure
1. Clean the heat exchanger and grill with a vacuum cleaner, or compressed
air.
2. Care must be taken not to damage the fins.
System Maintenance and Service
113