Publicidad
Idiomas disponibles
Idiomas disponibles
Controller Display Panel Functions
11.2.1 Running the Pump
The pump can be switched on by pressing the PUMP button on screen. The box
will turn from grey to green which indicates that the pump is on. By clicking the
PUMP button again, the pump will switch off turning the box back to grey.
11.2.2 Choosing the Coolant Setpoint
The Coolant setpoint can be set by choosing values using the arrows and
changing the increments accordingly. By clicking on the increments, the
increment can be changed from 0.1 to 1.0 and vice versa.
11.2.3 Running the system
The system can be run by pressing the RUN button on screen. The box will turn
from grey to green which indicates that the machine is running. To switch OFF
the machine, click the button again.
11.3 Sleep Screen
Touch panel goes to sleep when the screen has been inactive for 3 minutes and
shows coolant supply temperature. The system does not go to sleep screen
when the information screen is being displayed or when the unit is not running.
94
Publicidad
