Descargar Imprimir esta página

MikroTik RB912UAG-2HPnD Guía Rápida página 28

Ocultar thumbs Ver también para RB912UAG-2HPnD:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 7
Antenna Installation WARNING:
those antennas certified with the product are to be used. The installer should configure the output power level of antennas, according to country regulations and
per antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues.
LIST OF APPROVED 2.4 GHz ANTENNAS:
15 dBi Omni Directional (Model: WLO-2450-15)
13 dBi Omni Directional HP (Model: ODH 24-13)
17 dBi Sector (Model: SA 24-90-17-WB)
20 dBi Panel (Model: WLP-2450-20)
24 dBi Dish (Model: DC 24-HD-PFIP)
The same type of antenna and lower antenna gain than those listed above may also be used in accordance with certification.
Innovation, Science and Economic Development Canada
IC: 7442A-912G2HPND
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s).
Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) L'appareil ne doit pas produire de brouillage; 2) L'
appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.
CAN ICES-003 (A) / NMB-003 (A)
Antenna Installation WARNING:
antennas certified with the product are to be used. The installer should configure the output power level of antennas, according to country regulations and per
antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues.
LIST OF APPROVED 2.4 GHz ANTENNAS:
15 dBi Omni Directional (Model: WLO-2450-15)
13 dBi Omni Directional HP (Model: ODH 24-13)
17 dBi Sector (Model: SA 24-90-17-WB)
20 dBi Panel (Model: WLP-2450-20)
24 dBi Dish (Model: DC 24-HD-PFIP)
The same type of antenna and lower antenna gain than those listed above may also be used in accordance with certification.
UKCA marking
            
It is the installer's responsibility to ensure that when using the authorized antennas in the USA (or where FCC rules apply); only
It is the installer's responsibility to ensure that when using the authorized antennas in Canada (or where IC rules apply); only those

Publicidad

loading