Descargar Imprimir esta página

KRESS KG753 Manual Del Usuario página 10

Cortacésped manual kress 40v 21' bl

Publicidad

Idiomas disponibles

Idiomas disponibles

battery must be fully charged before the first mow.
Always fully charge the two batteries at same time.
More details can be found in charger's manual.
OPERATION
Power indicator light (See Fig. I)
I
See details in BATTERY STATUS part
IMPORTANT:
When only one light is illuminated, your battery
is overly discharged, even though the machine
may still be capable to work. Continuing to
EN
operate your machine with the battery in this
discharged condition may reduce the life and
performance of your battery.
When no light is illuminated, at least one battery
is not fully installed or battery may be defective,
please double check the batteries are fully
seated into position.
Starting and Stopping (See Fig.J1,J2)
J1
Hold
1
10
For starting, press and hold the safety lock-out
button while then pulling back the operating bail
Handle.
Adjusting the cutting height (See Fig. K)
height. The blades continue to rotate after the
machine is switched off, a rotating blade can cause
injury. Do not touch rotating blades.
Storage (See Fig.L1,L2)
2
J2
K
7 — 4" (100mm)
6 — 3-1/2"(90mm)
5 — 3-1/8" (80mm)
4 — 2-3/4" (70mm)
3 — 2-3/8" (60mm)
2 — 2" (50mm)
1 — 1-1/2" (40mm)
WARNING! Stop, release operating bail and
wait until the motor stops before adjusting
L1
3
2
1
2

Publicidad

loading

Este manual también es adecuado para:

Kg753.x